Hot red Masking tape high temperature composite PET red masking tape features: a high-level red / white textured paper (Micron paper) for PET polyester film substrate composite coating made of high-performance silicone pressure sensitive adhesive advantages: good mechanical properties, abrasion, tear, special adhesive treatment, adhesion strength, tear after masking the surface without leaving any adhesive residue. Uses: Suitable for computer chassis, cabinets, and other high-temperature spray masking; Specifications: Length: 33m (length can be customized) Thickness: 0.22mm / 0.26mm Width: 980mm (can be cut) temperature: 280 ° Note matters: 1, , pay attention to is pasted object surface is not oil, powder, dust, or other release agent. 2, the tape used in the material containing plasticizers, viscosity affected, note the use of detection. 3, stored at less than 25 ℃, relative humidity of 65%, dry environment; avoid direct sunlight and high temperature (40 ℃ above) and humidity (75% RH) environment; storage period: six months. Red hot red Masking Masking in Advanced Masking for the substrate, with a high temperature, solvent, no excess glue and other characteristics, mainly for paint, paint, PC boards, circuit boards, circuit boards immersion tin, crest welding capacitor taping, coils, transformers. Bai Meiguang paper using composite polyester film coated with silicone adhesive, tensile strength, high temperature adhesive strength, and more for the PCB and the powder coating industry. PCB with white composite tape: viscosity, high temperature, no penetration, no adhesive residue. Applicable to PCB over protection tin stove. Powder coating or paint with white composite tape: viscosity, high temperature, no penetration, no adhesive residue. Applied to computer chassis, cabinets, and other high-temperature spray masking. Parameters: Thickness (mm): 0.19 / 0.2 Color: Red Tack (Ball No. / 25mm): 12 ± 2 retention force (H / 25mm): 6 ± 0.5 Adhesion (early / late, N / 25mm): 6.5 / 5 Tensile Strength (N / 25mm): 80/75 elongation at break (%): 38 ± 2 Temperature resistance: UP to 270 ℃ surface wrinkles rate: 19.5% Storage environment: 25 ℃, 65% RH Material: plain red textured paper substrate, good initial tack, acid, solvent, holding strong viscosity, using double-sided PI film composite refining. Not color, not bad, high and low temperature (-20 ℃ ~ 270 ℃), anti-aging, environmental protection, in line with EU standards of packaging materials for the PCB industry, bonding and other electronic products.